General Information
WAMŽ BLG M
WAM BLG is a special group of products
specifically designed for very high alkali and alkaline earth process
applications either at high temperatures or at ambient temperatures.
This technology was developed in conjunction
with Oak Ridge National Laboratory. The goal was to create a technology
which would perform well in gasification processes. These technologies
typically involve the gasification of waste streams which contain high
levels of alkali and alkaline earth compounds. As a result the by-products
of the gasification process tend to be very reactive with refractory
compounds. This product family was specifically designed to resist reaction
with alkali and alkaline earth salts in any physical state (solid, liquid,
gas).
Typical application areas are gasification units
designed to treat black liquor, coal tailings or similar waste streams. The
product is only available as precast, prefired shapes. These are tailor
engineered to fit the vessel of interest. This product has been used to
create shapes as simple as 30 inch straights to complicated self supporting
dome structures.
Typical Technical Data
WAMŽ BLG M
| Classification: |
Mortar |
| Placement Method: |
Trowel or Dipping |
| Typical Water Requirement Trowel (%wt): |
~25 |
| Typical Water Requirement Dipping
(%wt):
|
~30 |
| Maximum Recommended Service Temperature (°F): |
3000 |
CHEMICAL ANALYSIS
Calculated wt.% Based on Common Oxides
| Aluminum Oxide (Al2O3):
|
90.9 % |
| Silicon Dioxide (SiO2):
|
0.9 % |
| Titanium Dioxide (TiO2):
|
<0.1 % |
| Iron(III) Oxide (Fe2O3):
|
0.1 % |
| Calcium Oxide (CaO):
|
8.1 % |
| Magnesium Oxide (MgO):
|
<0.1% |
| Combined Alkali Oxide (Na2O + K2O):
|
<0.1 % |
Additional technical data may be available.
Please contact your sales representative for more information.
Data on this table represent typical properties and cannot be used for
specification purposes. Material Safety
Data Sheet for WAMŽ BLG M
|
